Spatter Cure SC-07

SPATTER CURE SC-07 is the only non-toxic, non-pollutant, water based, inorganic anti- spatter compound cum flux. Coating of this compound before welding (on the surface to be welded) has several advantages. Spatters do not stick to the surface, so no more chipping and grinding for smooth parent surface. Diffusion of non-metallic and gaseous inclusions are minimized removed providing a dense and clean weld joint. Spatters along with coating is easily removed either by hair brush or by washing. It is water based.

Welding with Spatter Cure SC-07

A coating of SPATTER CURE SC-07, before welding, is recommended in the modern day welding process technology for MS, STAINLESS STEEL, and ALLOY STEELS etc because of its following characteristics:
•HEAT RESISTANT CHARACTERISTICS – makes it an effective anti-spatter compound.  The Conventional Chipping and/or Grinding operations to clean the spatters are totally eliminated; maintaining a clean environment in the shop floor. This takes care of the safety factor at the work place.
Moreover the cleaning cost is reduced by about 70%.  Slag is also easily detached.
•FLUXING PROPERTIES –The diffusion of Non-Metallic and Gaseous Inclusions in the weld pool is minimized to provide dense and clean weld. The O2 and N2 content in the weld melt are drastically restricted thereby improving the Mechanical and Metallurgical properties of the weld joint.
•INSULATION PROPERTIES – The depth of penetration is increased as the heat loss from the top of the weld melt is restrained by the film, thereby conserving about 5-10% of energy.
A coating of SPATTER CURE SC-07 improves the overall performance of welding.

A coating of SPATTER CURE SC-07, before welding, is recommended in the modern day welding process  technology for MS, STAINLESS STEEL, and ALLOY STEELS etc because of its following characteristics:

postweld

• HEAT RESISTANT CHARACTERISTICS – makes it an effective anti-spatter compound.  The conventional chipping and/or grinding operations to clean the spatters are totally eliminated; maintaining a clean environment in the shop floor. This takes care of the safety factor at the work place.

Moreover the cleaning cost is reduced by about 70%. Slag is also easily detached.

FLUXING PROPERTIES –The diffusion of Non-Metallic and Gaseous Inclusions in the weld pool is minimized to provide dense and clean weld. The O2 and N2 content in the weld melt are drastically restricted thereby improving the Mechanical and Metallurgical properties of the weld joint.

INSULATION PROPERTIES – The depth of penetration is increased as the heat loss from the top of the weld melt is restrained by the film, thereby conserving about 5-10% of energy.

Various studies undertaken to ascertain the advantage of Spatter Cure SC-07 resulted in the inference that usage of Spatter Cure SC-07 increases the efficiency of a welder by about 25%. The productivity also increases by a striking 10%.

The range of Spatter Cure products gives a dense and clean weld with no post weld operations like chipping and grinding. Just wipe off the spatters with a wire brush or even a cloth, and you will get a shining, clean surface with a visibly perfect weld joint. To know more about Spatter Cure Products, click here.
 
        To get a detailed know-how about how Spatter Cure SC-07, read our FAQs section.
 

Last updated by on .

Comments are closed